Motorola Netopia 3342N User Manual
Page 106
Administrator’s Handbook
106
b. Click
Submit
.
At this point you should be ready to do the final save on the configuration
changes you have made.
The yellow
Alert symbol will appear beneath the Help button on the right-hand
end of the menu bar.
10.
Click on the Alert symbol and you will see whether your changes
have been validated.
11.
If you are satisfied with the changes you have made, click
Save and Restart
in the Save
Database box to Apply changes and restart Gateway.
You have now configured your Motorola Netopia® Gateway for bridging, and it will bridge all traffic across
the WAN. You will need to make configurations to your machines on your LAN. These settings must be made
in accordance with your ISP. If you ever need to get back into the Motorola Netopia® Gateway again for
management reasons, you will need to manually configure your machine to be in the same subnet as the
Ethernet inter face of the Motorola Netopia®, since DHCP ser ver is not operational in bridge mode.