Motorola Netopia 3342N User Manual
Page 168
Administrator’s Handbook
168
•
The host 199.211.211.17 is the source of the Telnet packets you want to block, while the destination
address is any IP address. How these IP addresses are masked determines what the final match will be,
although the mask is not displayed in the table that displays the filter sets (you set it when you create
the filter). In fact, since the mask for the destination IP address is 0.0.0.0, the address for Destination
IP address could have been anything. The mask for Source IP address must be 255.255.255.255 since
an exact match is desired.
•
Source IP Address = 199.211.211.17
•
Source IP address mask = 255.255.255.255
•
Destination IP Address = 0.0.0.0
•
Destination IP address mask = 0.0.0.0
•
, find the destination por t and protocol numbers (the local Telnet por t):
•
Protocol = TCP (or 6)
•
Destination Por t = 23
•
The filter should be enabled and instructed to block the Telnet packets containing the source address
shown in step 2:
•
For ward = unchecked
This four-step process is how we produced the following filter from the original rule: