Motorola Netopia 3342N - Manual (Page 126)

Administrator’s Handbook
126
Log Event Messages
Administration Related Log Messages
1. administrative
access attempted: This log-message is generated whenever the user attempts to access
the router's management interface.
2. administrative
access authenticated
and allowed: This log-message is generated whenever the user attempts to access
the router's management interface and is successfully authenticated
and allowed access to the management interface.
3. administrative
access allowed: If for some reason, a customer does not want password protection for
the management interface, this log-message is generated whenever
any user attempts to access the router's management interface and is
allowed access to the management interface.
4. administrative
access denied -
invalid user name: This log-message is generated whenever the user tries to access the
router's management interface and authentication fails due to incor-
rect user-name.
5. administrative
access denied -
invalid password: This log-message is generated whenever the user tries to access the
router's management interface and authentication fails due to incor-
rect password.
6. administrative
access denied - telnet
access not allowed: This log-message is generated whenever the user tries to access the
router's Telnet management interface from a Public interface and is
not permitted since Remote Management is disabled.
7. administrative
access denied - web
access not allowed: This log-message is generated whenever the user tries to access the
router's HTTP management interface from a Public interface and is
not permitted since Remote Management is disabled.
System Log Messages
1. Received NTP Date
and Time: This log-message is generated whenever NTP receives Date and
time from the server.
2. EN: IP up: This log-message is generated whenever Ethernet WAN comes up.
3. WAN: Ethernet
WAN1 activated at
100000 Kbps: This log-message is generated when the Ethernet WAN Link is up.
4. Device Restarted: This log-message is generated when the router has been restarted.
DSL Log Messages (most common):
1. WAN: Data link
activated at <Rate>
Kbps (rx/tx) This log message is generated when the DSL link comes up.
2.WAN: Data link
deactivated This log message is generated when the DSL link goes down.
3. RFC1483 up This log message is generated when RFC1483 link comes up.
4. RFC1483-<WAN-
instance>: IP down This log message is generated when RFC1483 link goes down.