Firewall tutorial, General firewall terms, Basic ip packet components – Motorola Netopia 3342N User Manual

Page 158: Basic protocol types

Advertising
background image

Administrator’s Handbook

158

Firewall Tutorial

General firewall terms

Note:

Breakwater Basic Firewall (see

“BreakWater Basic Firewall” on page 142

) does not make

use of the packet filter suppor t and can be used in addition to filtersets

Filter rule: A filter set is comprised of individual filter rules.

Filter set: A grouping of individual filter rules.

Firewall: A component or set of components that restrict access between a protected network and the
Internet, or between two networks.

Host: A workstation on the network.

Packet: Unit of communication on the Internet.

Packet filter: Packet filters allow or deny packets based on source or destination IP addresses, TCP or UDP
por ts.

Port: A number that defines a particular type of service.

Basic IP packet components

All IP packets contain the same basic header information, as follows:

This header information is what the packet filter uses to make filtering decisions. It is impor tant to note
that a packet filter does not look into the IP data stream (the User Data from above) to make filtering deci-
sions.

Basic protocol types

TCP: Transmission Control Protocol. TCP provides reliable packet delivery and has a retransmission mech-
anism (so packets are not lost). RFC 793 is the specification for TCP.

Source IP Address

163.176.132.18

Destination IP Address

163.176.4.27

Source Por t

2541

Destination Por t

80

Protocol

TCP

DATA

User Data

Advertising
This manual is related to the following products: