Associating a filter set with an interface – Motorola Netopia 3342N User Manual
Page 176
Administrator’s Handbook
176
Associating a Filter Set with an Interface
Once you have created a filter set, you must associate it with an inter face in order for it to be effective.
Depending on its application, you can associate it with either the WAN (usually the Internet) inter face or the
LAN.
To associate an filter set with the LAN, return to the
Filter Sets page.
Click the
Ethernet 100BT
link.
The
Ethernet 100BT page appears.
From the pull-down menu, select the filter set to associate with this
inter face.
Click the
Submit
button. The Aler t icon will appear in the upper right
corner of the page.
Click the Aler t icon to go to the validation page, where you can save your configuration.
You can repeat this process for both the WAN and LAN inter faces, to associate your filter sets.
When you return to the Filter Sets page, it will display
your inter face associations.