Wireless mac authorization – Motorola Netopia 3342N User Manual
Page 63
63
The screen expands.
Router EDCA Parameters (Enhanced Distributed Channel Access) govern wireless data from your Gate-
way to the client;
Client EDCA Parameters govern wireless data from the client to your Gateway.
☛
NOTE:
It is not recommended that you modify these settings without direct knowledge or instructions
to do so. Modifying these settings inappropriately could seriously degrade network per for-
mance.
•
AIFs: (Arbitration Inter frame Spacing) the wait time in milliseconds for data frames.
•
cwMin: (Minimum Contention Window) upper limit in milliseconds of the range for determining initial ran-
dom backoff. The value you choose must be lower than cwMax.
•
cwMax: (Maximum Contention Window) upper limit in milliseconds of the range of determining final ran-
dom backoff. The value you choose must be higher than cwMin.
•
TXOP Limit: Time interval in microseconds that clients may initiate transmissions.
(When
Operating Mode is B-only, default values are used and this field is not configurable.)
Wireless MAC Authorization
Wireless MAC Authorization allows you to specify which client PCs are allowed to join the wireless LAN by
specific hardware address. Once it is enabled, only entered MAC addresses that have been set to Allow will