MGE UPS Systems EPS 7000 - Manual (Page 12)

1.3 General Description
EPS 7000 is a family of compact, high-efficiency uninterruptible power systems. Standard power ratings for single-
module systems range from 300 to 500 kVA. EPS 7000 are optimized for compatibility with non-linear
computer-type loads. Computer-aided UPS diagnostics and modular construction assures that any required service
on the UPS can be identified and completed rapidly. Remote system monitoring, remote annunciation of UPS
performance signals, and telecommunication capabilities allow total control of the UPS by the user.
The EPS 7000, SSC, battery, and all auxiliary equipment is listed for safety by Underwriter’s Laboratories, Inc. (UL)
under UL Standard 1778 and under Canadian Standards Association (CSA) standard C22.107.
Major components of the EPS 7000 Shared Systems include:
◗
UPS Shared Systems
◗ SSC static switch cabinet
◗ SSC maintenance bypass cabinet
Each of these cabinets is described below. Figure 1-1 shows the Shared System.
Figure 1-1: EPS 7000 System., S-S Configuration, 1 GCC (not shown) per Module, located on SSC Cabinet.
Introduction
EPS 7000 Shared Systems
page 1 — 2