MGE UPS Systems EPS 7000 - Manual (Page 35)

Operation page 2 —7
Users Manual
2.7 Battery Measurements
To display battery voltage, current, ambient temperature, and time available or remaining, press the battery key on the
keyboard. see Figure 2-7.
Figure 2-7: Battery Measurements Displays.
Select battery measurements by
pressing the "battery" pushbutton.
UBAT.
V
AVAILABLE BAT.TIME
MN %KV LOAD =
IBAT.
* A
T BAT.
°
C
OR
REMAINING BAT. TIME
MN %KV LOAD =
ı
ı
ı
ı
Baattery voltage (VDC), charge (+) or discharge
(–) current (ADC), and battery temperature
(degrees Celsius).
If the main input (main 1) source is available, this
indicates the amount of battery time (in minutes)
available in the event of a main input outage.
If the main input (mains 1) source is out of
tolerance or is unavailable, this indicates the
amount of battery time (in minutes) remaining for
on-battery operation.