MGE UPS Systems EPS 7000 - Manual (Page 34)

2.6 Power Frequency Measurements
To display power or frequency measurements, press the “W.Hz” key on the keyboard. See Figure 2-6.
Figure 2-6: Power and Frequency Measurements Displays.
Operation
EPS 7000 Shared Systems
page 2 —6
Select power and frequency measurements
by pressing the
„
pushbutton.
FREQ. INP. BYP. INV.
HZ
LOAD P1 P2 P3
KW
P. TOTAL P.KW P.KVA
LOAD
POWER FACTOR
LOAD P.F. =
P LOAD / Pn
= %
LOAD P1 P2 P3
KVA
(PN= KW)
„
„
„
„
„
„
„
Frequency in Hertz for the main input (mains 1),
bypass input (mains 2), and inverter output.
Real power drawn by the load in kilowatts, for
each phase.
Percentage of real power drawn by the load,
relative to the rated output of the UPS module or
SSC.
Apparent power in kVA drawn by the load for
each phase.
Total real power (in kW) and apparent power (in
kVA) drawn by the load.
Load power factor (real power divided by
apparent power)