Minicom Advanced Systems 3000 - Manual (Page 14)

DS VISION 3000
13
Figure 18 shows a Line Splitter L cascaded to a Receiver DCL.
200m/660ft
Receiver DCL
Player
Transmitter/Broadcaster
Line Splitter Long
100m/330ft Receiver
DCL
Receiver
DCL
300m/1,000ft
300m/1,000ft
Figure 18 Receiver DCL + Line Splitter L
Figure 19 shows two Receiver DCL units cascaded to 300m/1,000ft. (You can
cascade up to 10 levels of Receiver DCL / Line Splitters).
100m/330ft 200m/660ft
Receiver DCL
Player
Transmitter/Broadcaster
Receiver DCL
Figure 19 Cascaded Receivers DCL
6. Pre-installation guidelines
Place cables away from fluorescent lights, air conditioners, and machines that are
likely to generate electrical noise.
Twisted Pair wiring - installation tips
· The minimum recommended bend radius for Twisted Pair cable is 4 cm.
· Don’t twist the Twisted Pair cable.
· Don’t over tighten wire ties.
· Don’t bend the Twisted Pair cable more than 90 degrees.
· Don’t use a stapler for installation.
· Don’t stretch or apply a pull-force greater than 11 kg.