Minicom Advanced Systems 3000 - Manual (Page 28)

DS VISION 3000
27
13. Controlling the system
To control the system:
Click the Control tab or choose View/Control, the Control window appears, see
Figure 31.
Connected
devices
appear here
Control
buttons
Topology
Figure 31 Control window
The table below explains the functions of the Control buttons:
Button Function
Video broadcasting to remote unit
Audio broadcasting to remote unit
Serial command to remote unit
Bi-directional Serial command
Selecting the ports to command
You can select the ports to command in any of the following ways.
From the topology on the left hand side:
Tick the individual checkboxes of the units you want to send a command. Or tick
the desired Group – all commands will then be sent to all units in the Group.