Minicom Advanced Systems 3000 - Manual (Page 38)

DS VISION 3000
37
Figure 42 Service window
Upgrading firmware
Upgrade firmware to improve functionality and fix bugs. Firmware updates can be
found on the Minicom website
www.minicom.com in the Support section under
Product Upgrades. For specific upgrade information on the DS Vision 3000 system
see explanations and release notes of each firmware version.
1. Save the firmware update on your hard drive and unzip it to a temporary folder.
2. Verify the system topology by clicking on the Detect button in the Topology tab
and note the number of levels and units connected to the system.
3. Go to the Service window and check the current Firmware and FPGA versions of
all units by clicking the Query button and selecting Firmware or FPGA, see
Figure 43. The version appears in the Version line, see Figure 44.
Click here for F/W
version
Click here for
FPGA version
Figure 43 Query button