Matsushita CF-30 - Manual (Page 52)

9-30
7.2.17. Setting the KB Cover, Hinge Cover L, Hinge Cover R and Keyboard
1. Insert the front hooks of the Keyboard to the Top Cabinet in
order, and set the Keyboard.
2. Fix the Hinge Cover L and R using the 4 Screws <N5> No1
to No 3
3. Fix the Hinge Cover L and R using the 2 Screws. <N2>
No1, No2
4. Fix the Bluetooth PCB using the Screw. <N5>
5. Fix the KB Cover using the 4 Screws. <N5> No1 to No4
Note:
Tighten the Screws in the numbered order (No1 to No4).
Tighten the Screws in the numbered order (No1 to No3).
Tighten the Screws in the numbered order (No1, No2).
Screws <N2>: DRHM5054XA
Screws <N5>: DRQT26+D4FKL
7.2.18. Setting the HDD
1. Set the HDD FPC to HDD.
2. Attach the Heater to HDD.
3. Attach the Heater Sheet to the Heater.
4. Attach the 2 Sheets to HDD.
5. Attach the 6 HDD Forming MFYPC and the two HDD
Terminal Plate Upper to the HDD Damper Ass'y.
6. Attach the six HDD Forming MFYPC and the two HDD
Terminal Plate Upper to the HDD Damper Ass'y.
7. Set the HDD Damper Ass'y to HDD.
8. Attach the Side Cushion to the HDD L Case Ass'y.
9. Set the HDD U Case Ass'y and the HDD L Case Ass'y, and
set the two Tabs of the HDD L Case Ass'y.
10. Fix the HDD U Case Ass'y and the HDD L Case Ass'y using
the 4 Screws <K1-17> and Screw <K1-16>.
Screws <K1-16>: DFHE5025XA
Screws <K1-17>: DRQT2+E8FKL
<N5>
<N5>
<N5>
<N5>
<N5> <N2>
<N2>
<N5> <N5>
KB Cover
Hinge Cover L
Hinge Cover R
Keyboard
<N5>
Bluetooth PCB
No.1
No.3
No.2
No.4
No.1
No.2 No.3
No.1
No.2
HDD U Case Ass’y
HDD FPC
Heater
<K1-17>
<K1-16>
HDD L
Case Ass’y
Tab
Tab
HDD
HDD
Damper
Ass’y
Heater Sheet
Sheet Sheet
<K1-17>