Matsushita CF-30 - Manual (Page 55)

9-33
(10)
Attach the HDD Cushion (Yellow)
Attach the HDD Cushion (Yellow)
Attach the HDD Cushion (Black)
Attach the HDD thermal Plate
1 2
1 2 1 2
0 1
0 1
1 2
HDD Cushion
(Black)
* Notes:
HDD Thermal Plate
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Fold back matching 4 corners.
Do not bend it at a sharp
angle to put natural R.
To the level of attaching
closely in this range
Prepare the metal plate bend
When attaching HDD Cushion Plate and HDD Cushion (Black),
set the bending part of the metal plate up.
Longer Direction
Metal Plate
*Ensure the direction is right. (lateral) Keep the space to secure the air vent.
Put the edge on the same line.
Difference: 1