Specification – Multiquip submersible pumps px400 User Manual
Page 9
cx400/px400 Sub. pump • operation and partS manual — rev. #1 (12/03/10) — page 9
specificatiOn
1.
motor rotation – Upon start-up, the pump "kicks" in the opposite direction of motor rotation. The correct rotation is
counterclockwise (CCW) as viewed from the impeller end of the pump.
2.
mechanical Seal oil – Use Paraffin P70 oil lubricant. Fill oil cavity 75% to 85% full (allow air space for expansion).
3.
control box - For unattended operation use CB3 Control box (Table 2).
table 1. Specifications
Model
CX400/PX400
Type
Submersible Trash Pump
Motor Type
Condenser Start
Condenser Drive
Impeller
Plastic
Suction & Discharge Size
2 in. (50 mm)
Maximum Pumping Capacity
72 gallons/minute/(273 liters/minute)
Max Head
34 ft. (10.3 meters)
Power
1/2 HP (.37 kw)
Voltage Phase
1Ø 115 V
Starting Amps
35.4
18.4
Running Amps
7
6.2
Control Box Required
NO (See Note 3)
Temperature Range
32° - 104°F (0° - 40°C)
Thermal Overload Protection
YES
Rotation
CCW (See Note 1)
Mechanical Seal Oil Capacity
15.54 in
3
(255 cc)
(See Note 2)
10.67 in
3
(175 cc)
(See Note 2)
Power Cable Length
19 ft (approximately 6 m)
Dry Net weight
21.4 lb (9.7 kg)
18.3 lb (8.3 kg)
Table 2. control box Specifications
Model
voltage type
ul/cSa
listed
thermal overload
Protection
Float Switch
Capability
CB3
115 VAC, 60 Hz Single Phase
YES
NO
YES