InFocus 560 - Manual (Page 15)

Setting Up the LitePro
LitePro 560/570 User’s Guide 7
8. Connect the LitePro cable to the monitor connector on your com-
puter according to the instructions below. Follow the instructions
that apply to your computer.
The resolution of the LitePro’s image is 640x480. Images
between 640x480 and 800x600 resolution are displayable, but
will be compressed. Images above 800x600 are not
displayable.
If your computer’s screen resolution is greater than 800x600,
you will need to reset it to 800x600 or less. Refer to your
computer’s documentation for instructions.
• If you have a an IBM-compatible desktop computer , plug the
“VGA” end of the LitePro cable into the monitor connector on
the computer.
If you want to display your presentation on your monitor as
well as on the projection screen, attach the “Monitor” end of
the LitePro cable to the end of the monitor cable as shown
below.
Figure 4. Connecting an IBM-compatible desktop computer
power switch “Monitor” end of
LitePro cable
monitor cable “VGA” end of
LitePro cable
CONNECT.FRA Page 7 Tuesday, January 28, 1997 9:53 AM