InFocus 560 - Manual (Page 34)

Using the LitePro
26 LitePro 560/570 User’s Guide
• In Menu 2 and the Audio Menu, you can also use select/enter to
select/de-select a function or to increase the value of a function.
Removing the Menu from the Screen
Press the menu button to remove the menu from the screen.
Resetting Menu Functions to the Default Settings
To reset all menu settings to their factory default values, select Reset
from Menu 2. Refer to page 30 for more information about Reset.
Menu 1 Functions
Brightness
Adjusting the brightness changes the color saturation. Adjusting the
brightness has no effect if a computer source is not connected.
To adjust the brightness:
1. Press the menu button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Brightness”.
3. Press the up arrow button to increase brightness. Press the down
arrow button to decrease brightness.
Tint
The tint function adjusts the red-green color balance. Adjusting the
tint has no effect if a computer is not connected.
To change the tint:
1. Press the menu button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Tint”.
3. Press the up arrow button to increase the amount of green in the
image. Press the down arrow to increase the amount of red in the
image.
USING.FRA Page 26 Tuesday, January 28, 1997 9:55 AM