InFocus 560 User Manual
Page 36
Using the LitePro
28
LitePro 560/570 User’s Guide
Menu 2 Functions
Rear Projection
When you select Rear Projection, the LitePro reverses the image so
you can project from behind the screen as shown here.
To enable or disable to rear projection mode:
1. Press the
menu
button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Menu 2”.
3. Press
select/enter
to display Menu 2.
4. Use the right or left arrow buttons to highlight “Rear Projection”.
5. Press
select/enter
to enable Rear Projection. The image
immediately changes to display the mirror image. (Press
select/
enter
again to change it back.)
Source Prompt
When you are displaying your presentation and you press
select/
enter
to switch sources, the LitePro momentarily displays the name of
the active source. If you don’t want this display, follow the steps
below to disable the Source Prompt.
To enable or disable the Source Prompt:
1. Press the
menu
button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Menu 2”.
3. Press
select/enter
to display Menu 2.
4. Use the right or left arrow buttons to highlight “Source Prompt”.
5. Press
select/enter
to enable or disable the Source Prompt.
USING.FRA Page 28 Tuesday, January 28, 1997 9:55 AM