InFocus 560 - Manual (Page 41)

Using the LitePro
LitePro 560/570 User’s Guide 33
Language
The Language function changes the language in which the LitePro
menus are displayed. You can choose from English, French, German,
Spanish or Italian. The default is English.
To change the language of the menus:
1. Press the menu button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Menu 2”
3. Press select/enter to display Menu 2.
4. Use the right or left arrow buttons to highlight “Language”.
5. Press select/enter until the language you want is displayed. Each
time you press select/enter , the LitePro immediately re-displays
the menu in the selected language.
Tracking
The LitePro usually adjusts tracking automatically when you connect
your computer. However, if the display shows evenly spaced, fuzzy,
vertical lines or if the projected image is too wide or too narrow for
the screen, you might be able to improve it by adjusting the tracking
manually with the Tracking function.
To adjust the tracking:
1. Press the menu button to display Menu 1.
2. Use the right or left arrow buttons to highlight “Menu 2”.
3. Press select/enter to display Menu 2.
4. Use the right or left arrow buttons to highlight “Tracking”.
5. Press select/enter or the up arrow button to increase the tracking
value. Press the down arrow button to decrease the value.
USING.FRA Page 33 Tuesday, January 28, 1997 9:55 AM