Intermec 6620 - Manual (Page 122)

SECTION 8 CMOS Setup
8-8 6620 Hand-Held Computer Technical Reference
"
LPT Port:
Sets the 378 IRQ 7 (default), 278 IRQ 7, or 3BC
IRQ 7 address; Auto (automates the port); or Dis-
abled (disables the parallel port).
"
Parallel Port:
Sets the port type of the parallel port — Bidirec-
tional (default), EPP 1.7, EPP 1.9, ECP, FDD, or
Disabled.
" NOTE: When the external floppy is attached, this port type is ignored. Once
the floppy drive is removed, this type is reset.
"
Ethernet:
Enables the on-board ethernet device — Disabled
(default) or Enabled.
" NOTE: To connect to another computer, a dock or port expander is required.
Press the [Esc] key to return to the Advanced menu.
"
CPU Cache
Enables (default) or disables the level 1 cache mode.
"
HDD Write Cache
Enables (default) or disables the hard drive cache.