Intermec 6620 - Manual (Page 25)

SECTION 1 Introduction
6620 Hand-Held Computer Technical Reference 1-13
System Configuration
Note that the following paragraphs apply to the standard
configuration for the computer; but keep in mind that it can
be configured to meet your specific needs. Additional RAM
can be obtained, to bring the total RAM to 48 MB.
The following constitutes the configuration items needed for
a minimum development.
"
PEN*KEY 6620 Computer, with a minimum of 16 MB
of system RAM for Windows.
"
The Windows Toolkit for the 6620 Computer.
"
Main batteries: at least one.
"
Single dock or wall charger.
"
The parallel diskette drive to update flash software.
"
The parallel floppy disk drive (dock required) or some
type of PC Card storage media for transferring files.
Development Environments
Windows 95
The 6620 Computer can run any mouse-aware Windows ap-
plication. Note, if the system is using a 40 MB or 80 MB
ATA Card for the operating system, the Windows configura-
tion provided by Norand Mobile Systems Division is not a
full-featured Windows. You may find that files you need
have not been included. Add the files if you do need them.
Borland’s C compiler includes a utility called TDUMP. You
can run TDUMP on an executable file to display the files or
libraries called by the executable.