Preparing a 6620 boot card – Intermec 6620 User Manual
Page 80
Advertising
SECTION 3
6620 Recovery Procedures
3-18 6620 Hand-Held Computer Technical Reference
Preparing a 6620 Boot Card
" NOTE:
This pertains to a minimum load and does
not work on Windows NT.
1. Insert the 6620 Recovery CD-ROM into any desktop
PC that has CD-ROM support running any version of
Windows 95
and a PC Card Dock, such as a laptop
computer with a CD-ROM drive. The “Recovery Util-
ity” should AutoPlay. If not, do the following to manu-
ally start the recovery procedures:
a. Use Windows Explorer to find the CD.
b. Click the right mouse button on the CD and click
the AutoPlay button.
2. Select Image a Boot Card via the “Recovery/Re-
image Utility” window, then click Continue.
Advertising