Intermec 6620 - Manual (Page 79)

SECTION 3 6620 Recovery Procedures
6620 Hand-Held Computer Technical Reference 3-17
2. Select Image a Network Recovery PC Card, then
click the Continue button
3. Click the OK button on the “Recovery Utility” warn-
ing, if it is displayed (page 3-7), to continue.
4. Use the applicable Browse buttons to ensure the
source volume is correct and the destination is the PC
Card slot via the “Netcard” window. Click the Image
Network PC Card button to continue. The PC Card
will be formatted.
" NOTE: The version of Windows running on the desktop PC used to prepare
the disk is unimportant as all files necessary to make a bootable sys-
tem on the disk are maintained on the Recovery CD-ROM.