Icom IC-V85-T - Manual (Page 51)

38
8
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Priority watch
Priority watch checks for signals on “priority channels” while
operating on a VFO frequency.
D Memory or call channel watch
While operating on a VFO frequency, memory or call channel
watch monitors for signals in the selected memory or call
channel every 5 sec.
q Select the desired memory channel or the call channel.
w Push
[CLR] to select VFO mode.
e Push [FUNC] , then push [ PRIO ] (7) to start watching.
• VFO is displayed, then the decimal point “ . ”, on the frequency
readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
r Push [CLR] to stop watching.
D Memory scan watch
While operating on a VFO frequency, memory scan watch
monitors for signals in each memory channel in sequence,
every 5 sec.
q Push [MR] to select memory mode, if necessary.
• “X” appears.
w Push [FUNC] , then push [ SCAN ] (5) to start the memory
scan.
e Push [FUNC] , then push [
PRIO
] (7) to start the watching.
• VFO is displayed, then the decimal point “ . ”, on the frequency
readout blinks.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
r Push [CLR] to stop the watching.
SKIP
Mch 1
Mch 2
Mch 3
Mch 4
Mch 5
Mch 99 Mch 6
Priority channel
Memory
scan
5 sec.
50 msec.
VFO frequency
5 sec. 50 msec.
VFO frequency Memory channel