Icom IC-V85-T - Manual (Page 77)

64
17
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
General
• Frequency coverage : (unit: MHz)
USA Tx: 144–148/Rx: 136–174* 1
Taiwan, Thailand, Korea Tx/Rx: 144–146
General (LM) Tx/Rx: 136–174* 1
* 1 : Guaranteed: 144–148 MHz range only
• Type of emission : FM
• Number of memory channels : 107 (incl. 6 scan edges and 1 call)
• Frequency resolution
: 5, 10, 12.5, 15, 20, 25, 30, 50 kHz
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Frequency stability
: ±2.5 ppm
(–10°C to +60°C; +14˚F to +140˚F)
• Power supply requirement : Supplied (or optional) Icom’s battery
pack or 11.0 V±15% external DC power
• Current drain : (at 7.2 V DC: approx.)
Transmit at 7 W (High) 2.6 A
at 4 W (Middle) 2.0 A
at 0.5 W (Low) 1.0 A
Receive standby 80 mA
power save 30 mA
max. audio 250 mA
• Antenna connector : BNC (50 Ω)
• Dimensions (proj. not included) : 56(W) × 110(H) × 34.4(D) mm
2 7 ⁄
32
(W)×4 11 ⁄
32
(H)×1 11 ⁄
32
(D) in
(with BP-227)
• Weight (approx.) : 310 g; 12.5 oz
(with BP-227 and Ant.)
165 g; 5.8 oz
(without battery pack and Ant.)
■
Transmitter
• Modulation system : Variable reactance frequency mod.
• Output power (at 7.2 V) :
[Thailand] 5.5 W/4 W/0.5 W (High/Mid/Low)
[Others] 7 W/4 W/0.5 W (High/Mid/Low)
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –60 dBc
• Microphone connector : 3-conductor 2.5 (d) mm ( 1 ⁄ 10 ″)/2.2 kΩ
■
Receiver
• Receive system : Double-conversion superheterodyne
• Intermediate frequencies : 1st: 46.35 MHz, 2nd: 450 kHz
• Sensitivity (at 12 dB SINAD) : Less than 0.2 µV
• Squelch sensitivity (threshold) : Less than 0.16 µV
• Selectivity : More than 55 dB
• Spurious and image rejection : More than 60 dB
• Intermodulation
: More than 55 dB
• Audio output power : More than 0.3 W at 10% distortion with
(at 7.2 V DC) an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm ( 1 ⁄ 8 ″)/8 Ω
All stated specifications are subject to change without notice or obligation.