InFocus 760 - Manual (Page 29)

Using the LitePro 760
20 LitePro 760 User’s Guide
The arrow buttons are auto-repeating; they repeat their function as
long as you hold down the button.
contrast
Adjust the contrast if the white areas of the projected image do not
appear to be solid white. To increase the contrast, press the
contrast +
button. To decrease the contrast, press the contrast - button. There are
64 contrast levels.
Both contrast buttons are auto-repeating; they continue to adjust the
contrast setting as long as you hold down the button. You cannot
adjust contrast in the LitePro test pattern.
brightness
Adjusting the brightness lightens or darkens the image. To lighten the
image, press the
+ (plus) side of the brightness button. To darken the
image, press the - (minus) side of the brightness button. There are 64
brightness levels.
Adjusting the brightness changes the amounts of red, green and blue
in the image. If the LitePro menu is displayed when you press the
brightness button, you will see the Red, Green and Blue values change
accordingly.
Both ends of the brightness button are auto-repeating; they continue to
adjust the brightness setting as long as you hold down the button.
sync
Adjusting the synchronization fine tunes the LitePro to match the
signals from your computer, decreasing fuzzy, streaked images.
There are 32 sync levels. Press the sync + or sync - buttons to cycle
through the sync levels until you find the one that best suits your
computer.
Osprey.bk Page 20 Monday, December 11, 2000 1:38 PM