Chapter, Troubleshooting – ITT SMART SWITCH 801P5 User Manual
Page 33
Page 29 801P5 Smart Switch
TM
CHAPTER
5
TROUBLESHOOTING
It is unlikely that you’ll have any problems with the
Smart-Switch
TM
. However, just in case, this chapter contains
information to help diagnose and correct any error messages you
may see.
ERROR MESSAGES
Below are error messages that you may see during operation or
programming, along with brief descriptions of how to correct
them. If you see an error that is not listed here, contact Neo-Dyn
Customer Service. The contact information is located in
Chapter 1.
Display Shows ---0
The [MENU] key has been pressed and the unit has a password
other than 0000. Use the [UP/DOWN ARROW] keys to set the
first digit at the correct value. Use the [SELECT] key to move to
the next digit. Repeat this process until the display shows the
correct password. Press the [STORE] key to enter the
programming menu.