I-Tech Company CMS 6R4 Series - Manual (Page 101)

10-3
Command Reference Guide
10.3 Command Response Messages
When commands are sent to the CMS, the unit can respond with either
verbose (English Text) or terse messages (numeric / abbreviated). The port
configuration commands (/P and /N) can specify an individual response format
for each port. In addition to the Terse and Verbose response modes, the port
configuration commands can also select the Quiet Mode. When the Quiet
Mode is selected, the port will not send messages in response to commands.
The table below summarizes the various response messages for both the Terse
and Verbose modes.
Terse Verbose
0 OK
0 RAM Test Passed
1 Connected *
2 Busy
3 Disconnected
4 Invalid Command
5 Are You Sure (Y/N) ?
6 Invalid Parameter
7 Invalid Syntax
8 Invalid Access
9 Enter Site ID:
A Aborted
B Enter Password:
C Invalid Password
D RAM Test Failed at *
E Inactivity Timeout, Disconnected
F Data in Buffer from Previous Connection ...
Re-Enter Logoff Sequence to Purge Buffer.
G Asleep
H Plug Defaulted
I Plug Booted
J Plug Turned On
K Plug Turned Off
* These verbose Response Messages include additional information not
provided by terse Response Messages.