I-Tech Company CMS 6R4 Series - Manual (Page 111)

10-13
Command Reference Guide
/SN Display Network Status
Displays the Network Status Screen, which lists current conditions and
parameters for the Network Port. For more information, please refer to
Section 7.2.
Availability: Supervisor Only
Format:
/SN [Enter]
Response: Displays Network Status Screen
/TELNET Telnet Connection Out
Establishes an outward bound Telnet Connection, using the parameters
specified in the command line.
Availability: Supervisor Only
Format:
/TELNET<ip>[port][raw] [Enter]
Where:
ip The target IP address.
port The
raw The
Response: Displays Telnet connect message.
/U Send Parameters to a File
Saves all user-defined CMS-6R4 configuration parameters to an ASCII text file
as described in Section 8.1. Please see Section 8.2 for instructions regarding
restoring saved parameters.
Availability: Supervisor Only
Format:
/U [Enter]
Response: The CMS-6R4 will send a series of command lines.
/UF Upgrade Firmware
When new versions of the CMS-6R4 firmware become available, this
command is used to update existing firmware as described in Section 9. This
command will only function at the Network Port, Internal Modem Port (Port 7)
and at Serial Port One.
Availability: Supervisor Only
Format:
/UF [Enter]
Response: The CMS-6R4 will display a menu which offers the options to
retain existing parameters, default parameters, or abort.