Detail “a, Figure 10.3 removing/installing the batteries, Of figure 10.3) – Invacare Lynx L-4 User Manual
Page 41: Figure 10.3)
10 BATTERIES
41
3.
Connect the wiring harness to the batteries in the following order (Detail “B” of FIGURE 10.3):
A. NEGATIVE (-) BLACK battery cable to the NEGATIVE (-) battery terminal on the left battery.
B.
POSITIVE (+) RED battery cable to the POSITIVE (+) battery terminal on the right battery.
C. WHITE battery cable (Jumper) to the POSITIVE (+) battery terminal on the left battery and the NEGATIVE (-) battery terminal on the right
battery.
4.
Replace the top of the battery box and secure with the twelve mounting screws (Detail “A” of FIGURE 10.3). Securely tighten.
5.
Reinstall the battery box on to the scooter frame. Refer to Removing/Installing the Battery Box on page 39.
6.
Reinstall the seat. Refer to Removing/Installing the Seat on page 23.
FIGURE 10.3 Removing/Installing the Batteries
DETAIL “A”
Battery
Box
Battery Box
Cover
DETAIL “B”
Right Battery
Left Battery
POSITIVE (+)
RED Battery
Cable
POSITIVE (+)
RED Battery
Terminal
NEGATIVE (-)
BLACK Battery
Terminal
WHITE Battery Cable
(Jumper)
NEGATIVE (-) BLACK
Battery Cable
Battery
Box
Battery Box
Cover
Cables to
Thermal
Switch
(not
shown)