Invacare Lynx L-4 - Manual (Page 48)

12 ACCESSORIES
Lynx™L-3 & Lynx L-4 Scooters 48 Part No. 1143205
12.3 Installing/Removing the Safety Flag
Installing
1. Install the bracket into the accessory tube located on the back of
the seat.
2. Install mounting knob to secure the bracket in place. Securely
tighten.
3. Install safety flag into bracket.
Removing
1. Remove the safety flag from the bracket.
2. Remove the mounting knob that secures the bracket in place.
3. Remove the bracket from the accessory tube located on the back
of the seat.
FIGURE 12.3 Installing/Removing the Safety Flag
ƽ WARNING
The installation of the safety flag onto the back of the scooter seat significantly increases the length of the scooter. When
turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury
and/or damage to the surrounding property may result.
 For this procedure, refer to FIGURE 12.3.
Bracket
Safety Flag
Accessory Tube
Mounting Knob
Insert Into Accessory
Tube