Invacare Lynx L-4 - Manual (Page 46)

12 ACCESSORIES
Lynx™L-3 & Lynx L-4 Scooters 46 Part No. 1143205
12 Accessories
12.1 Installing/Removing the Accessory Tube
Installing
1. Position the accessory tube onto the seat frame.
2. Secure the accessory tube to the seat frame using the mounting
screw (Detail “A”).
3. Remove the mounting knob from the accessory tube.
4. Remove the cap from the accessory tube.
Removing
1. Remove the mounting screw securing the accessory tube to the
seat frame.
2. Remove the accessory tube from the seat frame.
FIGURE 12.1 Installing/Removing the Accessory Tube
ƽ WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.
 The crutch/cane holder, safety flag, rear mounted basket and oxygen holder all install into the accessory tubes; ONLY one
of these may be installed at a time.
 For this procedure, refer to FIGURE 12.1.
DETAIL “A”
Cap
Mounting Knob
Mounting Screw
Installs HERE
Accessory Tube Mounts
to the Seat Frame HERE