Intermec NORAND 600 - Manual (Page 12)

SECTION 1 General Information
1-6 NORAND R 600 Series Industrial Mobile Computer User’s Guide
Display
This Industrial Mobile Computer offers an easy to read
Liquid Crystal Display (LCD) with touch screen. The
display shows status messages, keyed-in entries, customer
or product lists, calculations, and prompts for responses.
The touch screen can be used with a stylus, or your finger
to choose functions, record signatures, or enter data.
Adjust Contrast
To adjust the display contrast level, hold down the [Gold]
key and press either to increase to decrease.
Backlight (Models 602 and 603)
Your Industrial Mobile Computer display features a
backlight. Backlighting provides a great benefit in dark
conditions. Backlighting does, however, reduce battery life,
therefore, turn off the backlight when not needed.
Backlight On/Off
To turn the backlight on, hold down the [Gold] key and
press the key. To turn the backlight off, hold down
the [Gold] and press the key again.
Battery
" NOTE: It is important to charge your Industrial Mobile Computer for at least
4 hours before you use it the first time.
This Industrial Mobile Computer uses a 1550 mAh lithium
ion rechargeable battery.
If your computer goes into a shutdown mode because of low
battery condition, your computer will not operate. Your
computer does this to ensure that the data is protected.