Intermec NORAND 600 - Manual (Page 24)

SECTION 2 Operation
2-6 NORAND R 600 Series Industrial Mobile Computer User’s Guide
Installing a Modem Card
The modem card installs in the same slot and in the same
manner as the CompactFlash card.
Booting Your Computer
For DOS Applications
1. Apply power by pressing the [I/O] (Resume/Suspend)
key or pressing the reset keys ([Gold], [Esc], [0])
simultaneously and holding for three seconds. The
Power Status LED will light.
2. The default load on the card displays these choices:
1. Norand R Utilities
2. DOS Command Prompt. Making this choice puts
you to the DOS prompt 600 C:\>.
3. If you do not make a choice within 10 seconds, your
600 Series computer automatically boots to the
Norand R Utilities. From the Utilities Programs, as-
suming you have the appropriate host software and
hardware, you can setup the communication options
and also download your application.
For Windows CE Applications
The following steps outline the initial boot and Windows CE
load on the 602 Computer.
1. The AT BIOS loads the boot sector from the IDE drive.
2. MS-DOS loads itself from the IDE drive and executes
from RAM. It loads device drivers from
C:\CONFIG.SYS then executes the system command
shell, C:\COMMAND.COM, which then executes
initial commands from C:\AUTOEXEC.BAT.