Intermec NORAND 600 - Manual (Page 20)

SECTION 2 Operation
2-2 NORAND R 600 Series Industrial Mobile Computer User’s Guide
Charging the Battery
Charging your battery pack can be done either in a dock or
using an ac wall charger connected to your computer.
Figure 2-1 on page 2-2 shows your computer being
connected to an ac charger. Figure 2-2 on page 2-3 shows
the computer and explains the Power Status conditions that
you might see during the charging process.
Normal time to recharge your battery pack is four hours.
When your battery is fully charged your computer should
run about 8--10 hours.
Figure 2-1
Computer Being Connected to a Wall Charger
1
2
The following devices charge the battery when seated in
the unit.
"
Single/Vehicle dock
"
Multidock