Intermec NORAND 600 - Manual (Page 25)

SECTION 2 Operation
NORAND R 600 Series Industrial Mobile Computer User’s Guide 2-7
HIMEM.SYS is installed by MS-DOS during
CONFIG.SYS processing, is currently required by
LOADCEPC.EXE, and provides real-mode access to
memory above one MB.
3. LOADCEPC.EXE is executed during the
AUTOEXEC.BAT processing. On the 602 Computer,
Windows CE itself consists of the NK.BIN binary file
that contains the memory image of the Windows CE
configuration. LOADCEPC.EXE copies this file image
into RAM and then jumps to its starting address.
4. After NK.BIN (Windows CE memory image) is loaded
and executed, Windows CE is in control of the system.
From this point, only Windows CE functions are acces-
sible to application developers for the 602 Computer.
5. TASKMAN.EXE (the Windows CE shell program) is
executed by Windows CE. The first time CE is execut-
ed, “Task Manager” performs pen calibration and
writes the calibration results to the registry. The reg-
istry is then flushed to persistent storage.
“Task Manager,” then searches for the
“\Storage Card\Wince\WCESTART.INI” file. If the
file is found, the contents of the file are parsed for any
user application to launch and execute. If no applica-
tion is found, “Task Manager” allows manual browsing
of the files system and execution of programs.
Installing Windows CE
Components
This section outlines the Windows CE release installation
for the NORAND 602 Computer. The installation includes
a demo application.
Reflashing the 602 Computer installs the most current
System Management Interface (SMI BIOS) for the 602
Computer and erases the current registry for Windows CE