Intermec NORAND 600 - Manual (Page 27)

SECTION 2 Operation
NORAND R 600 Series Industrial Mobile Computer User’s Guide 2-9
Running Windows CE and the Demo
Application
Do the following to run the demo application using the
Windows CE operating system:
1. Simultaneously press and hold the [GOLD], and
[Esc], and [0] keys for at least 3 seconds to reset the
602 Computer.
2. Calibrate the touch screen. You may have to calibrate
the screen several times until the calibration applet
detects a “good” calibration within its tolerance limits.
After finishing calibration, the Windows CE desktop
will appear with the “Task Manager” application up
and running.
3. The demo application starts from “Task Manager”
with sample menus for several NMSD base applica-
tions: Invoice, Service, and Pickup and Delivery.
Menu buttons for Print and Charge Card utilities are
available for demo, but are not functional.
Downloading from Host Computer
1. Install your computer into a dock.
2. Download program into your computer.
There are several ways to download your application.
EXAMPLE: You can load the program onto the CompactFlash card, install it into
your computer, and select the program from the directory.
Opening your Application
Press the [I/O] (Resume/Suspend) key. Opening the
application totally depends on your application definition.