IBM 8317 User Manual
Page 112
8.
Return the boot block recovery jumper to its original position and replace the
cover.
9.
Connect the power cord back to the system and power the system on. When
the system POST tests, it will report several POST errors. These errors can be
ignored. The standard POST/BIOS Update Utility screen will appear after a
pause.
10.
Select the desired language from the list and press Enter.
11.
Enter the serial number of the system and press Enter.
12.
Enter the Machine Type and model number of the system and press Enter.
13.
If a prompt appears stating that the BIOS ROM is older than (or the same as)
the BIOS ROM image, press Y to continue.
14.
When the flash programming is complete, remove the diskette from the drive
and press any key to restart the system.
106
Hardware Maintenance Manual