IBM Partner Pavilion T400F - Manual (Page 70)

The following procedure describes how to reattach a leader pin.
To reattach a leader pin by using the IBM Leader Pin Reattachment Kit:
1. Attach the leader pin attach tool ( 1 in Figure 20) to the cartridge 2 so that
the tool’s hook 3 latches into the cartridge’s door 4 . Pull the tool back to
hold the door open, then slide the tool onto the cartridge. Open the tool’s pivot
arm
5 .
Figure 20. Attaching the leader pin attach tool to the cartridge. To hold the cartridge door
open, hook the tool into the door and pull the tool back.
58 IBM TotalStorage LTO Ultrium 2 Tape Drive