Intellinet Network Solutions PRO SERIES INT-PSNC-UM-1106-06 - Manual (Page 42)

- 42 -
6.5 Event Trigger Configuration
6.5.1 MPEG4 Cameras, Dome Cameras and Network Video Server
This screen is used to receive captured video through e-mail or an FTP. You may also connect
external devices, such as an infrared sensor or alarm sensor, to use with the provided terminal
block (refer to Appendix F: The I/O Connector).
Trigger Condition
This is to select options for sending an event signal to the camera.
The camera receives an event signal from external devices such as an infrared sensor. You can
define the time (international 24h time format) in which the camera "listens" for incoming signals.
Activate the camera's internal motion detection using this option. The camera does a real-time
frame-by-frame comparison of the image material and can trigger an alert if it detects motion.
The camera does not have an IR motion detection sensor. It relies on a frame-by-frame
comparison, and, therefore, the internal motion detection cannot be used at night when no light
is present.
This activates a timer-based event. Values from 1 to 3600 seconds are valid. You can define the
time (international 24h time format) in which the camera's timer is active to trigger an output
event.