Intellinet Network Solutions PRO SERIES INT-PSNC-UM-1106-06 - Manual (Page 61)

- 61 -
7: PoE (Power over Ethernet) Support
Power over Ethernet, or PoE, technology describes a system to transmit electrical power, along
with data, to remote devices over standard twisted-pair cable in an Ethernet network. This
technology is useful for powering IP telephones, wireless LAN access points, network cameras,
remote network switches, embedded computers, and other appliances where it would be
inconvenient, expensive (mains wiring must often be done by qualified and/or licensed
electricians for legal or insurance reasons) or infeasible to supply power separately.
The standard IEEE 802.3af describes two types of devices: Power Sourcing Equipment (PSE)
and Powered Devices (PD). Power sourcing equipment provides power to the powered devices.
The network camera represents the powered device, whereas a PoE Injector is a PSE device.
The Pro Series Network Camera models, except for model 550710, are IEEE 802.3af standard
PoE compliant. They can be used with any IEEE 802.3af-compliant PoE injector.
NOTE: Camera model 550710 can only be powered over Ethernet using a special accessory.
On the next two pages, you can find an overview of available PSE equipment from INTELLINET
NETWORK SOLUTIONS. NOTE: The information is subject to change.
Power over Ethernet (PoE) Injector
1 Port, 48 V DC, IEEE 802.3af Compliant
Part Number / Model: 524179
PoE Midspan
8-Port rackmount, IEEE 802.3af compliant
Part Number / Model: 502931