Intermec PB41 - Manual (Page 11)

11 PB41 Printer Quick Start Guide
802.11b Self-Test Print-out Explanation (continued)
Description Test Item
Available Graphics LOC shows whether a font is Resident (R) or
Downloaded (D); DESCRIPTION describes the
graphic; Version and DATA of graphic program
load;NAMES give the “Easy Print” name, the Line
Printer name, and the hexadecimal equivalent of that
name.
Available Bar Codes All supported barcodes are displayed. “DE-
SCRIPTION” describes the graphic. “NAMES”
give the “Easy Print” name, the Line Printer name,
and the hexadecimal equivalent of that name.
Bluetooth Self-Test Print-out Explanation
Test Item Description
F/W Ver The internal software version (6.46 or greater)
Timeout The seconds between printing and sleep mode
RF Timeout Never
Baud Rate The speed at which the printer receives data
Parity Odd, Even, or None
Data Bits Matches with computer sending data to printer
Handshake The way the printer handles flow control from host
Burn Adj Amount of heat used to print on the thermal paper
Beeper May be turned On or Off
Chrg Beep May be turned On or Off
Batt1 Volt Current voltage of the first battery pack
Batt2 Volt Current voltage of the second battery pack
Printhd Tmp Temperature of the printer head (between 0 and 50
degrees)
Flash/RAM 1 Mb or 4 Mb Flash/1 Mb or 4 Mb RAM
Boot Ver Boot sector firmware
ComCtl Ver Communication Controller Version
Bluetooth RF Config Bar code shows MAC address for Bluetooth device;
BT Device Name; BT Service Name; BT Profile;
Class of Device; Discoverable; Connectable; Bond-
able; Authentication; Encryption; Passkey