Intermec PB41 - Manual (Page 16)

16 PB41 Printer Quick Start Guide
PB41 Battery Eliminator
The PB41 Battery Eliminator was designed exclusively for the
PB41 Printer. This device removes the need to have the battery
packs in your printer. The Battery Eliminator allows the PB41
to accept power from either an AC or DC source.
A typical installation would have the PB41 Printer mounted in a
vehicle and the Battery Eliminator receiving power from the ve-
hicle battery.
In scenarios where portability is not required, the Battery Elimi-
nator saves you from purchasing printer batteries. The Battery
Eliminator removes temperature concerns when charging or us-
ing your printer with battery packs.
Installing the Battery Eliminator
1 Remove the battery packs from your printer.
2 Install the Battery Eliminator into one of the battery pack
slots.
3 Connect the Battery Eliminator cable to the In-line Adapter
cable (p/n: 852-052-102).
4 Connect the In-line Adapter to the Truck Power Cable (p/n:
206-875-xxx). The Truck Power Cable installs to your ve-
hicle battery and is routed into the cab of your vehicle.
In-line Adapter
Battery Eliminator
Connects to truck
power cable