Before using your printer for the first time – Intermec PB41 User Manual
Page 7
7
PB41 Printer Quick Start Guide
3
Carefully push the card into the connector until it is fully
seated.
4
Replace the radio card cap.
Before Using Your Printer For The First
Time
Remove the protective tab strips underneath the batteries. They
are placed there to keep your printer from discharging during
shipment.
5
Push against the battery lock tab and lift the battery up be-
fore pulling on the protective tab strips. These tabs prevent
the battery contacts from touching and therefore, no charging
occurs.
6
If your printer won’t charge after removing the protective
tabs, check for and remove any residue in the battery pin
area.
Battery lock tabs
(one on each side)
Center battery
support posts
Battery pack
Battery contact protective
tab strip (one for each pack)
Battery contact
protective tab strips (removed)