ICP DAS USA RS-405/405F - Manual (Page 38)

Industrial Redundant Ring Switch – RS Series User Manual
TDRS4050601 ee
Rotary Switch (SW2) configuration
You can monitor current Switch 2 settings by this realistic image displayed. Check the
square box in front of
“HELP” to get more information.
W2 is a 16 position rotary switch on the front panel, right below the SW1. When the arm
of SW2 is switched to position "0", you would be able to set up specific values(Please go
to configuration page.) for recovery time(rtime), forward delay(ftime) , maximum
age(mtime), and hello time(htime) manually.
If it's on positions other than "0" ("1" to "F"), a set of preset values will be applied:
Roteray
SW position
F E D C B A 9 8
Recovery
Time
1.5s 1.4s 1.3s 1.2s 1.1s 1.0s
900
ms 800
ms
Forwarding
Delay
30s 28s 26s 24s 22s 20s 18s 16s
Hello Time 10s 10s 10s 10s 10s 10s 10s 10s
Max Age 40s 40s 40s 40s 40s 38s 34s 30s
Roteray
SW position
7 6 5 4 3 2 1 0
Recovery
Time 700
ms 600
ms 500
ms 400
ms 300
ms 200
ms 100
ms
N/A
Forwarding
Delay
14s 12s 10s 8s 6s 4s 4s N/A
Hello Time 10s 10s 8s 6s 4s 2s 1s N/A
Max Age 26s 22s 18s 14s 10s 6s 6s N/A