ICP DAS USA RS-405/405F - Manual (Page 61)

Industrial Redundant Ring Switch – RS Series User Manual
TDRS4050601 bbb
DIP Switch(SW1) configuration
You can monitor current Switch 1 settings by this realistic image displayed. Check the
square box in front of
“HELP” to get more information.
SW1 is a set of 6 jumpers on the front panel. It is a DIP toggle switch with two possible
positions -- on or off. Each position indicates one configuration state:
SW1 : DIP Switch Configuration
State
Jumper
OFF ON
1 Redundancy mode Tradition mode
2 Normal State Default Setting
3 Primary Switch Secondary Switch
4 Ring Protocol STP Protocol
5 Disable Ring Pair 2 Enable Ring Pair 2
6 Disable Ring Pair 1 Enable Ring Pair 1