Invacare PRONTO R2-250 - Manual (Page 11)

11
GENERAL GUIDELINES PROCEDURE 1
G
E
N
E
R
A
L
G
U
I
D
E
L
I
N
E
BATTERY BOX SHIPPING INSERTS
REMOVING BATTERY BOX
SHIPPING INSERTS (PRONTO
R2-250
SERIES
ONLY) (FIGURE 1)
NOTE: Wheelchairs ordered with batteries installed
have shipping inserts which must be removed before
using the wheelchair.
1. Remove the battery boxes from the wheelchair.
Refer to INSTALLING/REMOVING BATTERY
BOXES in PROCEDURE 11 of this manual.
2. Lift up on the shipping inserts to remove from the
battery boxes
3. Install the battery boxes onto the wheelchair. Re-
fer to INSTALLING/REMOVING BATTERY
BOXES in PROCEDURE 11 of this manual.
Battery
Box
Shipping Insert
Battery Box
Shipping
Insert
SHIPPING INSERT INSTALLED
SHIPPING INSERT REMOVED
FIGURE 1 - REMOVING BATTERY BOX SHIPPING INSERTS
NOTE: Battery box lid not shown for clarity.