Removing the cd-rom drive, Removing the cd-rom drive -11 – IBM 2193 User Manual
Page 121
Advertising
Adding and removing adapter cards and drives
8-11
Removing the CD-ROM drive
To replace the CD-ROM:
1. Disconnect the power, sound and signal cables from the CD-ROM.
2. Remove the four screws (two on each side) that hold the CD-ROM drive to
the chassis.
3. Open the door on the front of the computer.
4. Slide the CD-ROM drive forward through the front opening and remove it.
5. Reverse the procedure to install a new drive.
Advertising