Intel AXXSW1GB - Manual (Page 121)

108 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Defining Queues
The Queue Page contains fields for defining the QoS queue forwarding types.The Queue
Page allows network managers to define scheduling types. WRR Weights are defined
once the WRR option has been selected for a specific QoS service queue. Modifying
queue scheduling affects the queue settings globally.
To set the queue settings:
1. Click QoS > General > Queue. The Queue Page opens.
Figure 77. Queue Page
The Queue Page contains the following fields:
• Queue — Displays the number of queues for which the scheduling type and WRR
weights are defined.
• Scheduling — Indicates the scheduling type by which the bandwidth is allocated to
queues. The system supports selecting up to two group entries. Gro up entries must be
selected in consecutive order. The possible field values are:
— Strict Priority — Specifies whether traffic scheduling is based strictly on the
queue priority.
— WRR — Assigns the WRR scheduling type to the queue.
• WRR Weight — Assigns WRR weights to queues. This field is enabled only for
queues in WRR queue mode. If a queue is set to 0 weight, the queue is not
operational. Each queue has a weight range, queues 1-7 have the range 0-255, and
queue 8 has the range 1-255.
• % of WRR Bandwidth — Indicates the amount of bandwidth assigned to the QoS
queue.