Resetting the device – Intel AXXSW1GB User Manual
Page 23
10
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
•
System Up Time — Displays the amount of time since the most recent device reset.
The system time is displayed in the following format: Days, Hours, Minutes, and
Seconds. For example, 41 days, 2 hours, 22 minutes, and 15 seconds.
•
Base MAC Address — Displays the device MAC address.
•
IP Address — Displays the IP Address assigned to the switch
•
Mask — Displays the Mask Address assigned to the switch
•
Hardware Version — Displays the installed device hardware version number.
•
Software Version — Displays the installed software version number.
•
Boot Version — Displays the current boot version running on the device.
•
Jumbo Frames — Indicates if Jumbo Frames are enabled on the device. The possible
field values are:
— Enable — Enables Jumbo Frames on the device.
— Disable — Disables Jumbo Frames on the device
Resetting the Device
The Reset Page enables resetting the device from a remote location.
To prevent the current configuration from being lost, save all changes from the running
configuration file to the backup configuration file before resetting the device.
To reset the device:
1. Click System > Reset. The Reset Page opens:
Figure 8. Reset Page
2. Click .
The Ethernet switch is reset, and the device is updated.